والله ياستاذي الكريم Gu-sung18
انا لم اتجاهل الموضوع انما جرت العادة ان اتابع الموضوع الذي سألته لاسبوع او اثنين
لااني حسب تجاربي لن يرد على اي احد واستغربت انة يوجد رد على سوالي
ولوسمحت يااستاذي ممكن حظرتك تشوف ملف البوت التابع له
warning! partition table no found, use default partition table:....GxLoader v1.9 ......cpu family.: %s.....CK..chip model.: %s.....gx3201..board type.: %s.....dvbs-6605...memory size.: %lu MB....Flash size.: %u MB..%6d B..%6d KB..%6d MB..TRUE....FALSE...RAW.CRAMFS..ROMFS...JFFS2...YAFFS2..MINIFS..HIDE....UNKNOWN.Partition Version : %d.....Partition Count : %d.....Write Protect : %s.....CRC32 Enable : %s.....Table CRC32 : %X.....=====================================================================...%-3s%-8s%-8s%-10s%-9s%10s%11s%10s...ID..NAME....CRC32...START...SIZE....USED....Use%.... .%-3d....%08X....%s%-8s%-8s%-10s%08x%11s%11s%8d %%...---------------------------------------------------------------------...%s,%d partition_num=%d error....TABLE...flash_table_read.... mtdparts=m25p80:...@...(%s),...mem=31m videomem=33m console=ttyS0,115200 init=/init....mem=....videomem=...fbmem=..warning: cmdline transfer total size is not a multiple of 64, please check the cmdline......the memsize parsed from cmdline is %dM......root=...rootfs.. root=/dev/mtdblock%d...romfs...ecos.bin.gz.No found kernel partition!!!....LOGO....warning:logo_max_size(0x%x) < partition->total_size(0x%x)...cramfs..no find logo file %s!...%d..%dk.%dm.P.8.T.8.X.8.file(%s) line(%d):gpio parameters error.....vfd.c...help....?...Trying to load help.....Don't understand command ...bootup..Hit any key to stop autoboot:%2d ......%2d .....boot....boot> ..help [command] -- Displays help text....................error loading file %s!..error checking file %s!.....not find image/fs, read partition directly......gzip....lzma..........8..V8.......8..V8.].....8../8.............unexpected EOF..Could not allocate input bufer..bad header..invalid distance too far back...invalid distance code...invalid literal/length code.incorrect header check..unknown compression method..invalid window size.unknown header flags set....header crc mismatch.invalid block type..invalid stored block lengths....too many length or distance symbols.invalid code lengths set....invalid bit length repeat...invalid literal/lengths set.invalid distances set...incorrect data check....incorrect length check..Error: Bad gzipped data.....Error: gunzip out of data in header.....1.2.3...Error: inflateInit2() returned %d...Error: inflate() returned %d.....F8..G8.8H8..H8..H8..I8."J8..J8.\K8..K8..L8.^L8.pL8..M8.
side=%d num=%d)config fun=%d, actual fun=%d....board/gx3201/board-dvbs-6605/board-common.c.error: gxflash init failed......flash write lock!...flash driver switch to spinor flash.....error: flash driver switch to spinor failed.....not enable spi nand flash, can't switch.....not enable nand flash, can't switch.....flash switch flag not support...error: flash get type failed....Specify address and length to erase.....This will erase 0x%08x - 0x%08x. Are you sure? (y/N) ...Erasing... .done....This will erase entire serial flash. Are you sure? (y/N) ?..Specify address and data to be written..Writing... .%08x : %02x => .%02x....flash command insufficient parameters. please type 'flash help'.....probe...forcelist...lock....unlock..badinfo.readb...%08x : %02x => .....test....Unknown command.....out the partition size......Erase partition '%s' .......Write to partition '%s' ........error:flash_addr + download_size > flash_size, please confirm this error....Erase flash address: 0x%x, len: %d..Write to flash address: 0x%x, len: %d...Error flash address or partition name...arg not enough, please read help....Write from partition '%s' ......Write from flash address: 0x%x, len: %d.....show....KERNEL..error: no partition %s..mem=31850k videomem=33686k console=ttyS0,115200 init=/init..Unknown boot method: %s.....%08x : %s = %08x....GPIO0 %d : %d...info parameters not enough. please type info <class>....irq.fiq.sflash..dram....gpio....info %s not support.....1...1 <partition name | flash address> -- boots kernel..boot <partition name | flash address> -- boots kernel...2 <partition name | flash address> -- boots update kernel...bootup <partition name | flash address> -- boots update kernel..partition...partition <partition name> <server ip> <filename> -- show flash partition list..erase...partition erase <partition name> -- ....serialdown..serialdown <partition name|flash addr> <download size> -- download according seial. if you use boot tool, boot command: serialdown <partition name|flash addr> <file name>..serialdump..serialdump <partition name|flash addr> <dump size> -- download according seial. if you use boot tool, boot command: serialdump <partition name|flash addr> <length> <file name>.gdbdown.gdbdown <partition name|flash addr> <download size> [memory addr] -- download according jtag....info....info <class> - shows information on specified class.flash...flash <command> [args...] - flash operation.writeb..flash writeb <addr> <data> : writes one byte of data into specified address.read....flash read <flash addr> <memory addr> <length> -- read data from flash to memory....write...flash write <flash addr> <memory addr> <length> -- writes block of data into specified address..eraseall....flash eraseall -- erases all serial flash memory...flash erase <addr> <length> -- erases one or more sectors of serial flash memory....DRAM_TIMING_CFG.DRAM_DRAM_CFG...DRAM_PAD_CFG....SFLA_SPI_CTRL...SFLA_SPI_STATUS.FIQ_STATUS..FIQ_PENDSTAT....FIQ_ENABLESET...FIQ_STATUS_HI...FIQ_PENDSTAT_HI.FIQ_ENABLESET_HI....IRQ_STATUS..IRQ_PENDSTAT....IRQ_ENABLESET...IRQ_STATUS_HI...IRQ_PENDSTAT_HI.IRQ_ENABLESET_HI....###dev_status[0] = 0x%x dev_status[1] = 0x%x ...Not support write protect...dev_status1[0] = 0x%x dev_status1[1] = 0x%x ...... Warning Spi Flash unsupported, please info nationalchip........vendorid = %x deviceid = %x...romfs_load_kernel.... error return...Decompress kernel .....ok......fail
http://www.mediafire.com/file/hbsavai4k2...T.rar/file
واشكر اخي mohmaed
الم ترى روابط الشرح [b]EAX+4[/b]
وسامحوني لو طولت عليكم
انا لم اتجاهل الموضوع انما جرت العادة ان اتابع الموضوع الذي سألته لاسبوع او اثنين
لااني حسب تجاربي لن يرد على اي احد واستغربت انة يوجد رد على سوالي
ولوسمحت يااستاذي ممكن حظرتك تشوف ملف البوت التابع له
warning! partition table no found, use default partition table:....GxLoader v1.9 ......cpu family.: %s.....CK..chip model.: %s.....gx3201..board type.: %s.....dvbs-6605...memory size.: %lu MB....Flash size.: %u MB..%6d B..%6d KB..%6d MB..TRUE....FALSE...RAW.CRAMFS..ROMFS...JFFS2...YAFFS2..MINIFS..HIDE....UNKNOWN.Partition Version : %d.....Partition Count : %d.....Write Protect : %s.....CRC32 Enable : %s.....Table CRC32 : %X.....=====================================================================...%-3s%-8s%-8s%-10s%-9s%10s%11s%10s...ID..NAME....CRC32...START...SIZE....USED....Use%.... .%-3d....%08X....%s%-8s%-8s%-10s%08x%11s%11s%8d %%...---------------------------------------------------------------------...%s,%d partition_num=%d error....TABLE...flash_table_read.... mtdparts=m25p80:...@...(%s),...mem=31m videomem=33m console=ttyS0,115200 init=/init....mem=....videomem=...fbmem=..warning: cmdline transfer total size is not a multiple of 64, please check the cmdline......the memsize parsed from cmdline is %dM......root=...rootfs.. root=/dev/mtdblock%d...romfs...ecos.bin.gz.No found kernel partition!!!....LOGO....warning:logo_max_size(0x%x) < partition->total_size(0x%x)...cramfs..no find logo file %s!...%d..%dk.%dm.P.8.T.8.X.8.file(%s) line(%d):gpio parameters error.....vfd.c...help....?...Trying to load help.....Don't understand command ...bootup..Hit any key to stop autoboot:%2d ......%2d .....boot....boot> ..help [command] -- Displays help text....................error loading file %s!..error checking file %s!.....not find image/fs, read partition directly......gzip....lzma..........8..V8.......8..V8.].....8../8.............unexpected EOF..Could not allocate input bufer..bad header..invalid distance too far back...invalid distance code...invalid literal/length code.incorrect header check..unknown compression method..invalid window size.unknown header flags set....header crc mismatch.invalid block type..invalid stored block lengths....too many length or distance symbols.invalid code lengths set....invalid bit length repeat...invalid literal/lengths set.invalid distances set...incorrect data check....incorrect length check..Error: Bad gzipped data.....Error: gunzip out of data in header.....1.2.3...Error: inflateInit2() returned %d...Error: inflate() returned %d.....F8..G8.8H8..H8..H8..I8."J8..J8.\K8..K8..L8.^L8.pL8..M8.
M8..M8. N8..O8..P8.DR8..R8..S8..S8.2T8.ZT8..U8.ZU8.TU8..F8..............................................P.......s.......p...0.............. [email protected]...........;...x...8...........h...(...............H...........T...........+...t...4...........d...$...............D...........\...........S...|...<...........l...,...............L...........R...........#...r...2...........b..."...............B...........Z...........C...z...:...........j...*[email protected]...&...............F...........^...........c...~...>...........n...................N..........Q...............q...1...........a...!...............A...........Y...........;...y...9...........i...)...............I...........U...........+...u...5...........e...%...............E...........]...........S...}...=...........m...-...............M...........S...........#...s...3...........c...#...............C...........[...........C...{...;...........k...+...............K...........W.....@.....3...w...7...........g...'...............G..........._...........c.......?...........o.../...............O..........P.......s.......p...0.............. [email protected]...........;...x...8...........h...(...............H...........T...........+...t...4...........d...$...............D...........\...........S...|...<...........l...,...............L...........R...........#...r...2...........b..."...............B...........Z...........C...z...:...........j...*[email protected]...&...............F...........^...........c...~...>...........n...................N..........Q...............q...1...........a...!...............A...........Y...........;...y...9...........i...)...............I...........U...........+...u...5...........e...%...............E...........]...........S...}...=...........m...-...............M...........S...........#...s...3...........c...#...............C...........[...........C...{...;...........k...+...............K...........W.....@.....3...w...7...........g...'...............G..........._...........c.......?...........o.../...............O...............................A....@..........!.... [email protected]..............1....0............@...............................................................@.@.....................!.1.A.a.......................... .0.@.`....................................................................................................#.+.3.;.C.S.c.s.................cpu freq.: %d MHz...memory freq.: %d MHz....................................................................................................................................................................................................................................................................mulpin config errorside=%d num=%d)config fun=%d, actual fun=%d....board/gx3201/board-dvbs-6605/board-common.c.error: gxflash init failed......flash write lock!...flash driver switch to spinor flash.....error: flash driver switch to spinor failed.....not enable spi nand flash, can't switch.....not enable nand flash, can't switch.....flash switch flag not support...error: flash get type failed....Specify address and length to erase.....This will erase 0x%08x - 0x%08x. Are you sure? (y/N) ...Erasing... .done....This will erase entire serial flash. Are you sure? (y/N) ?..Specify address and data to be written..Writing... .%08x : %02x => .%02x....flash command insufficient parameters. please type 'flash help'.....probe...forcelist...lock....unlock..badinfo.readb...%08x : %02x => .....test....Unknown command.....out the partition size......Erase partition '%s' .......Write to partition '%s' ........error:flash_addr + download_size > flash_size, please confirm this error....Erase flash address: 0x%x, len: %d..Write to flash address: 0x%x, len: %d...Error flash address or partition name...arg not enough, please read help....Write from partition '%s' ......Write from flash address: 0x%x, len: %d.....show....KERNEL..error: no partition %s..mem=31850k videomem=33686k console=ttyS0,115200 init=/init..Unknown boot method: %s.....%08x : %s = %08x....GPIO0 %d : %d...info parameters not enough. please type info <class>....irq.fiq.sflash..dram....gpio....info %s not support.....1...1 <partition name | flash address> -- boots kernel..boot <partition name | flash address> -- boots kernel...2 <partition name | flash address> -- boots update kernel...bootup <partition name | flash address> -- boots update kernel..partition...partition <partition name> <server ip> <filename> -- show flash partition list..erase...partition erase <partition name> -- ....serialdown..serialdown <partition name|flash addr> <download size> -- download according seial. if you use boot tool, boot command: serialdown <partition name|flash addr> <file name>..serialdump..serialdump <partition name|flash addr> <dump size> -- download according seial. if you use boot tool, boot command: serialdump <partition name|flash addr> <length> <file name>.gdbdown.gdbdown <partition name|flash addr> <download size> [memory addr] -- download according jtag....info....info <class> - shows information on specified class.flash...flash <command> [args...] - flash operation.writeb..flash writeb <addr> <data> : writes one byte of data into specified address.read....flash read <flash addr> <memory addr> <length> -- read data from flash to memory....write...flash write <flash addr> <memory addr> <length> -- writes block of data into specified address..eraseall....flash eraseall -- erases all serial flash memory...flash erase <addr> <length> -- erases one or more sectors of serial flash memory....DRAM_TIMING_CFG.DRAM_DRAM_CFG...DRAM_PAD_CFG....SFLA_SPI_CTRL...SFLA_SPI_STATUS.FIQ_STATUS..FIQ_PENDSTAT....FIQ_ENABLESET...FIQ_STATUS_HI...FIQ_PENDSTAT_HI.FIQ_ENABLESET_HI....IRQ_STATUS..IRQ_PENDSTAT....IRQ_ENABLESET...IRQ_STATUS_HI...IRQ_PENDSTAT_HI.IRQ_ENABLESET_HI....###dev_status[0] = 0x%x dev_status[1] = 0x%x ...Not support write protect...dev_status1[0] = 0x%x dev_status1[1] = 0x%x ...... Warning Spi Flash unsupported, please info nationalchip........vendorid = %x deviceid = %x...romfs_load_kernel.... error return...Decompress kernel .....ok......failhttp://www.mediafire.com/file/hbsavai4k2...T.rar/file
واشكر اخي mohmaed
الم ترى روابط الشرح [b]EAX+4[/b]
وسامحوني لو طولت عليكم